Instrumentation
	Testers and Calibrators
	Indicating Annunciator              AN14				Loop Powered Process Indicator    A-705-20
		Four Input, 1/8 DIN annunciator is ideal				This bipolar 3-1/2 digit panel meter fits
		for any application where pressure,				standard 1/8 DIN cutout and includes
		temperature, level or flow switches				adjustable scale (gain), offset and
		require visible and audible alarms.				decimal point selection for quick field
		Two annunciators can be easily				calibration. Standard Model supplied
		wired together to form an eight input				0-100.0% for 4-20 mA input.
		system. LED alarm and power				Economical, short depth (0.5" behind
		indication on a NEMA 4 from panel.				panel) unit is a 4-20mA loop powered
		(42 x 91 x 105 mm).				process indicator with 0.6" LCD
	Process Indicator and Alarm     Series 1000				Proximity Switch Tester           A-800
		Low cost 1/16 DIN units provide 3-1/2				For 2, 3 or 4 Wire DC Switches.
		digit, 0.3" high LED readings from four				Switch status NPN/PNP indication is
		field selectable input ranges. Includes				designated by a yellow LED. Power
		integral power supply to operate				on is indicated by a bright green LED.
		2-wire transmitters. Optional low/high				Low Battery is indicated by a red
		SPST alarm relays can be set for				LED. Unit can be used with capacitive,
		direct or reverse action.				inductive, or photo electric sensors.
		(48 x 48 x 128 mm).				The pocket sized A-800 is supplied
						with a two 9 volt battery.